problem

[groucho]

hello,i have a devialet d200, everytime i configure a profile on my pc for it the amp does not accept it,devialet suggested a different sd card which i have done with same results,anyone fixed this issue thanks

[Peter van der Laarse]

Have you read the instructions on devialet website? Firmware? SD card type? Same laptop for sd card and firmware? First the basics....

[ray1234]

The first question comes to mind is - what format is your sdcard in?

[Axel]

hello,i have a devialet d200, everytime i configure a profile on my pc for it the amp does not accept it,devialet suggested a different sd card which i have done with same results,anyone fixed this issue thanks

Hi and welcome to the forum. 
You might find some useful information here: https://devialetchat.com/Thread-How-to-c...l-s-method
t

[devianet]

Also it would be helpful if you could tell us exactly what the amp says when it "does not accept it".

Ironically I had exactly this problem, on reconfiguring, recently, with the amp saying "invalid configuration file, please contact devialet support".

On closer inspection the dp_cfg.txt was truncated at 2kb and it was not the usual ~22kb in size. So it certainly was invalid.

I carefully repeated the download process and then all was well.

[Stian_Gel]

You should also try to make a brand new configuration, as editing previous ones can lead to problems.

I was having problems with pre-out not turning on when i edited an older configuration.

[groucho]

it was a brand new config,size is 22kb, keep getting sd card error with 2 different sd cards

[groucho]

tried in ntfs format and fat 32, neither any good ,whats it supposed to be

[groucho]

CRCD0EC
FW_VERSION 01100100
{
TARGET "D-PREMIER"

HW_VERSION 01040101
{
IHM "ihm_1000.hex"
PSU "psu_0302.hex"
HDMI "hdmi0208.hex"
DUET "duet0505.hex"
ADHL "adh_0303.hex"
ADHR "adh_0303.hex"
I2S "i2s_0308.hex"
WIFI "wifi0210.hex"
FPGA "fpga0503.hex"
DSPD "dspd0210.hex"
USB "usb_0501.hex"
}
HW_VERSION 01050000
{
IHM "ihm_1000.hex"
PSU "psu_0404.hex"
HDMI "hdmi0208.hex"
DUET "duet0505.hex"
ADHL "adh_0303.hex"
ADHR "adh_0303.hex"
I2S "i2s_0309.hex"
WIFI "wifi0210.hex"
DSPM "dspm0803.hex"
FPGA "fpga0503.hex"
DSPD "dspd0210.hex"
USB "usb_0501.hex"
}
HW_VERSION 01060000
{
IHM "ihm_1000.hex"
PSU "psu_0604.hex"
HDMI "hdmi0208.hex"
DUET "duet0505.hex"
ADHL "adh_0400.hex"
ADHR "adh_0400.hex"
I2S "i2s_0309.hex"
WIFI "wifi0210.hex"
DSPM "dspm0803.hex"
FPGA "fpga0503.hex"
DSPD "dspd0210.hex"
USB "usb_0501.hex"
}

[thumb5]

The SD card must be FAT, not NTFS.

You might like to try following the instructions in this thread: https://devialetchat.com/Thread-How-to-c...l-s-method.

It's very important that there are no files (including "hidden" files) on the SD card other than the configuration file, which must be called dp_cfg.txt.  Pim and Axel's instructions help to ensure that's the case.

Also, be sure not to modify the configuration file in any way - for example by opening it in a text editor and saving it - otherwise you'll invalidate the CRC and the configuration will be rejected.